This registration page may not work well in Internet Explorer. Please use a different browser to complete your registration.

NRMCA Exterior Flatwork Finisher Exams - April 21, 2026

April 21, 2026 8:00 AM - 3:00 PM (EDT)

Description


MRMCA is the Approved Local Sponsoring Group for NRMCA Exterior Flatwork Certifications.

This certification program has been developed to provide the basic knowledge on best practices for placing and finishing concrete flatwork, typically exterior slabs on the ground. The goal of certification is to ensure that knowledgeable contractors are selected to install concrete slabs and minimize the potential for failure resulting from installation practices.

This program is not intended for contractor personnel involved in larger projects like the construction of large interior floor slabs, streets / roads, mainline paving, or decorative concrete flatwork. Contractors involved in this work may consider programs offered under the ACI Flatwork Finishing Certification 

Registration for ACI Certification Programs through ACI  ACI Certifications

Certification Criteria

  • Attend a training course offered by MRMCA approved Examiners.
  • Successfully complete a written exam with a passing score of 70%.
  • Complete a performance evaluation by a representative of the sponsoring group during an installation of exterior flatwork or on a project.

There is no expiration of this certification. An individual who is not successful can request to retake the written exam for a fee. Certification can be revoked for improper finishing practices – documented and requested by the local sponsoring group or public agency. NRMCA will maintain a listing of personnel who are certified.

The body of knowledge for the written exam and performance evaluation for this certification is contained in Best Practices for Exterior Flatwork Finishing - NRMCA Concrete Exterior Flatwork Finisher Certification

The content covers the following:

  1. Concrete Required for Exterior Flatwork
  2. Placing and Finishing Concrete
  3. Joints
  4. Curing Concrete
  5. Types of Surface Problems and Causes

Spanish versions of the text and exams are available

  • STUDY SESSION and WRITTEN EXAM check-in starts promptly at 8 am ET.
  • Books will be given to you at the Training session.
  • A valid photo I.D. is required for all exams. 
  • Following the Training and Written Exam, all participants will have a personal break for lunch. (Please bring your own lunch and drinks).
  • PERFORMANCE EVALUATION: (Finishing Concrete) starts promptly at: 1pm ET. The Certification Program will conclude by 3:00 pm.
  • Applicants must have proper PPE and TOOLS.

 PPE:

  • Hard Hat
  • Reflective Vest
  • Long Sleeve Shirt / Long Pants
  • Rubber Gloves
  • Rubber / Work Boots

Tools: Bring these tools if you have them – (if you don’t have them, please advise us ASAP):

  • Bucket
  • Magnesium Hand Float
  • Concrete Edger
  • Jointer / Grover
  • Concrete Screeds
  • Broom
  • Concrete Bull Float
  • Curing compound sprayer
  • Shovel
  • Concrete Placer (Kumalong)
  • Mag Float
  • Steel Trowel
  • Concrete Finishing Broom

MRMCA 2026 CERTIFICATION PROGRAM POLICY:

  • Textbooks, Study Materials, and Zoom / Google Meet Information will be sent post-Registration: Please make sure the Examinee's (Applicant’s) correct address, phone number, and email are given at Registration.
  • NO REFUNDS or CREDITS will be given within 10 days of the Exam.
  • All Refunds and Credits will be subject to processing fees and study material deductions.
  • There are no returns on Textbooks. If you request a refund and have already received a Textbook, we will deduct that cost from your refund.
  • NO REFUNDS or CREDITS will be given for Exam Day no-shows. No exceptions!
  • Changes in company personnel are allowed up to 7 business days prior to the exam (Company will be responsible for transferring Textbook to new employee).
  • MRMCA reserves the right to change, cancel, or reschedule Review Sessions, Training, Exams, Performance Evaluations, and Exam Sites at any time. MRMCA will contact you if any changes occur.
  • ADA Accommodations: Please notify MRMCA directly if you require special ADA accommodations for testing. You will need to notify MRMCA at least 1 month prior to the exam to discuss options if available.

For more information email: certifications@marylandconcrete.com

Time

  • STUDY SESSION and WRITTEN EXAM check-in starts promptly at 8 am ET.
  • Books will be given to you at the Training session.
  • A valid photo I.D. is required for all exams. 
  • Following the Training and Written Exam, all participants will have a personal break for lunch. (Please bring your own lunch and drinks).
  • PERFORMANCE EVALUATION: (Finishing Concrete) starts promptly at: 1pm ET. 
  • The Certification Program will conclude by 3:00 pm.
  • Applicants must have proper PPE and TOOLS. (See list within the Description).

Location

Bay Ready Mix of Md LLC / Ernest Maier Inc. - Annapolis Junction, MD

ZOOM
View Event

Contact Information

Maryland Ready Mix Concrete Association
Name: Hayley Martin
Phone: 301-694-4899
Email: certifications@marylandconcrete.com

PLEASE READ CAREFULLY: If you are registering an employee, you must register the employee's email that they will be using for the Exam. If you are registering more than one employee, each individual will need to have their own email address in order to send reminders and for any Certificates from NRMCA.

The Examinee must present a valid U.S. ID at the start of the Review Session and provide a unique email address for the Examinee at least 5 days before the Exams.

For more information on the NRMCA Exterior Flatwork Finisher Certification Requirements see the front registration description. 

  • STUDY SESSION and WRITTEN EXAM check-in starts promptly at 8 am ET.
  • Books will be given to you at the Training session.
  • A valid photo I.D. is required for all exams. 
  • Following the Training and Written Exam, all participants will have a personal break for lunch. (Please bring your own lunch and drinks).
  • PERFORMANCE EVALUATION: (Finishing Concrete) starts promptly at: 1pm ET. The Certification Program will conclude by 3:00 pm.
  • Applicants must have proper PPE and TOOLS.

PPE

  • Hard Hat
  • Reflective Vest
  • Long Sleeve Shirt / Long Pants
  • Rubber Gloves
  • Rubber / Work Boots

Tools: Bring these tools if you have them – (if you don’t have them, please advise us ASAP):

  • Bucket
  • Magnesium Hand Float
  • Concrete Edger
  • Jointer / Grover
  • Concrete Screeds
  • Broom
  • Concrete Bull Float
  • Curing compound sprayer
  • Shovel
  • Concrete Placer (Kumalong)
  • Mag Float
  • Steel Trowel
  • Concrete Finishing Broom
We're sorry. No registrations are currently available. You may wish to contact the event organizer for assistance.
{{ vm.EventInfo.ErrorMessage }}

Select Registration Options

Edit
{{vm.regWarningMessage}}
{{vm.regAlertMessage}}

Exhibitor Opportunities

Name Price Att Qty
{{ et.Name }}
{{ et.IncludedAttendeesCount }} {{ et.AttendeeRegType.RemainingPerType }} Remaining {{ et.AttendeeRegType.RemainingPerType * -1 }} on Waiting List {{ et.AttendeeRegType.RemainingPerType * -1 }} Over Limit
{{ et.Remaining }} Remaining
 Sold out

Attendee Registration Options Total Remaining: {{ vm.EventInfo.VacantSpotsPerEvent }}

Waiting List Available
{{ vm.stats.totalAttendeesCount }} Registered , {{ vm.OverallOverAmount() }} on Waiting List , {{ vm.OverallOverAmount() }} Over Limit
Name Price Qty
{{ rt.Name }}
{{ rt.IsMemberOnly ? ' (Members Only)' : '' }}
Limit: {{ rt.LimitPerPurchase }}
Included Attendees: {{ rt.AttendeesCountPerOneRegistration }}
{{rt.Price | currency }} {{rt.PriceAfterDiscount | currency }} {{ rt.Price | currency }}
{{ rt.RemainingPerType }} Remaining
{{ rt.RemainingPerType * -1 }} on Waiting List
{{ rt.RemainingPerType * -1 }} Over Limit

{{'[[Sponsorship]] Opportunities' | localizeString:'['}}

Name Price Att Qty
{{ st.Name }}
{{ st.IncludedAttendeesCount }} {{ st.AttendeeRegType.RemainingPerType }} Remaining {{ st.AttendeeRegType.RemainingPerType * -1 }} on Waiting List {{ st.AttendeeRegType.RemainingPerType * -1 }} Over Limit
{{ st.Remaining }} Remaining
 Sold out
Continue

Registration Information

Edit

Exhibitor - {{er.Name}}

Exhibitor #{{ $index + 1 }}

Total: {{exhibitor.TotalPrice | currency}} {{ exhibitor.IsBenefit ? "- Included as a Benefit" : exhibitor.IsDiscounted ? "- Discounts have been applied" : ""}}
Exhibitor Directory
Primary Contact
Booth Information
Additional Information
Additional Items

Attendee - {{er.Name}}

{{ att.getAttendeeTerm(vm.EventSettings.AdditionalAttendeesTerm, $index) }} #{{ att.getAttendeeIndexDisplay(vm.EventSettings.AdditionalAttendeesTerm, $index) }}

Total: {{att.TotalPrice | currency}} {{att.DiscountMessage | localizeString:'['}}
A No Show fee is being assessed for {{fee.EventName}} on {{fee.EventStartLocalTimeString}}.
More Information Less information

Address

Phone

Additional Information
Event Sessions

{{slot.Name}}

{{$select.selected.SessionName}}
(full)
{{slot.SelectedSession.SessionDescription + (slot.HasFees ? " (Price: " + (slot.PriceTotal | currency) +")" : "")}}
Additional Items

{{'[[Sponsorship+]]' | localizeString:'['}} - {{er.Name}}

{{'[[Sponsor]]' | localizeString:'['}} #{{ $index + 1 }}

Total: {{sponsor.Price | currency}}
Continue

Additional Items

Edit

{{(vm.EventInfo.Terms.Donation || "Fundraising") + " Opportunities"}}

Campaign Name Item Description Amount
{{item.CampaignName}} {{item.Description + (item.ShowMinimumPrice && item.MinimumPrice ? " (Min: " + item.MinimumPrice + ")" : "")}}
Continue

Complete Registration

Edit

Terms & Conditions

No Show Policy

{{ vm.EventInfo.EventSettings.NoShowPolicy }}

Enter Promo Code

Billing Contact

Registration Protection
This event is synced to a webinar so no confirmation email will be sent from GrowthZone.

Thank you to our {{'[[Sponsor+]]' | localizeString:'['}}